Leaching Chemical YX500 to Replace Sodium Cyanide Powder
This product is a new type of leaching reagent independently developed by our company. It is a series of high-tech products that can completely replace cyanide and achieve efficient leaching of gold. The gold leaching agent is suitable for a variety of gold-containing ore and materials and related leaching processes, mainly including: gold, silver oxide ore, primary ore, cyanide tailings, gold concentrate, roasting slag, anode mud, etc. Leaching, pool leaching, charcoal pulp, stirring leaching and other leaching processes.
1. Lower Cost: Because of its special nature, it can reduce the cost of purchasing, shipping, warehousing, usage and
environmentally friendly equipment.
2. Easy to Use: Because it can be completely substituted for sodium cyanide in the cyanidation process, it is convenient to use and can replace at any time.
3. Easy to Transport: Due to its stable nature, it can be transported by rail, sea, road and air. There are no transportation
restrictions like sodium cyanide.
4.. High-Tech Products: It is a high-tech product that can replace sodium cyanide for gold leaching.
1. Background: more than 40 years mining industry experiences;
2. Product: patented products, specially for complex difficult mineral ores
3. Technology service: adjust formula and recommend most suitable product model according to different application environment
4. Technical engineer on-site service: arrive at site within 24 hours
5. Samples provided
Usage: It is used in the same way as sodium cyanide in heap leaching, pool leaching and agitation leaching of gold ore.
Alkalinity Adjustment: Generally, the pH of the slurry is adjusted to 10-12 using alkaline substances such as lime and caustic soda. After the raw ore is piled up or put into the pool, the alkalinity should be adjusted to the pH of 11±1.
Dosage: The dosage of CNLITE gold dressing agent can refer to the dosage of sodium cyanide. Its dosage is about 0.5 to 1.0 parts per thousand (500-1000g of reagent/ton of ore).
Add Method: It can only be used after it is fully dissolved in normal temperature water. The rate of dissolution is usually accelerated in running water or after thorough agitation.
Reagent Concentration: Because the pH and composition of different ores are different, the CNLITE gold leaching reagent should be dispensed according to the actual ore amount and the optimal concentration of the reagent obtained from the trail.
Y&X Beijing Technology Co., Ltd,is a professional metal mine beneficiation solution provider, with world-leading solutions for refractory beneficiation. Over the years, we have accumulated rich successful experience in the fields of copper, molybdenum, gold, silver, lead, zinc, nickel, magnesium, scheelite and other metal mines, rare metal mines such as cobalt, palladium, bismuth and other non-metal mines such as fluorite and phosphorus. And can provide customized beneficiation solutions according to the customer's ore properties and production conditions, including the most advanced beneficiation methods, the most efficient beneficiation reagents, to ensure maximum benefits for customers.
Over the years since its establishment, the company has focused on the R&D, production and application of efficient and Eco-friendly beneficiation reagents, provide effective support for the construction of green mines; improve the efficiency of beneficiation reagents, thus improving the effective utilization of resources; Some of our new flotation reagents have enabled some mines which cannot normally produce products to achieve industrialized production, turning waste into treasure!
Our company's products mainly include:
High-efficiency frother, its using effect is better than common frother such as terpineol oil, MIBC, etc;
High-efficiency collector, which can improve the metal recovery rate to a greater extent than traditional collectors;
The pioneering depressant is a powerful tool for solving complex refractory beneficiation of high talc, high carbon and high fine mud/ clay. The special copper depressant provides a better solution for beneficiation operations such as copper and molybdenum separation;
High-efficiency activators and regulators are also the cornerstone of our company to improve the beneficiation index;
Comparing with the world's top brands, our flocculent has better cost performance and richer experience in mining applications.
Y&X Company is willing to provide you with the better one-stop beneficiation solution. Hand in hand for a win-win situation, we sincerely look forward to cooperating with you!
Q1.Where is your factory located?
Our factory is in shandong, China. Located in an independent chemical park.
Q2.Can you give me a better price?
We value the cooperation with each customer and will provide you with the most favorable price.
Q3. How can you guarantee your quality?
Our production adopts fully automated production control to ensure the continuity of production and the stability of quality.
We have a strict production quality management system. Strict quality control is implemented on the raw materials, semi-finished products, finished products and products leaving the factory.
Quality first has always been the basic principle of our company. We also support customers to obtain samples for testing.
Q4.When is the delivery time?
Our production capacity: Xanthate: 50,000t/a; Dithiophosphate: 20,000t/a; Frother: 10,000t/a
For conventional products, we will keep inventory to ensure timely delivery within the time required by customers.
Q5:Which type of shipping would be better?
In consideration of the requirements of the customers in different rigions, we make deliveries by sea, air, train, truck, etc.
Q6: Can i get a sample?
Yes, you are welcome to get samples for testing.