YXFLOCF5567-Highly efficient and environmentally friendly flocculants for iron ore production

Product introduction

Flocculant is currently the most widely used agent in sewage treatment, and the flocculation process is an indispensable key link in the sewage treatment process. Its chemical composition can be divided into: inorganic salt flocculant, organic polymer flocculant and microbial flocculant. Users can make a reasonable choice based on the nature of wastewater. The combination of flocculant and wastewater treatment equipment makes wastewater treatment more effective and effectively solves wastewater treatment problems.
 

Item	Specification
Product Name	Polyacrylamide / Flocculant
Appearance	White crystal granular
Molecular Weight (10,000)	1200-1500
Dgree Of Hydrolysis(%)	23~28
Purity	≥90%
Packing	25kg / bag, 1 ton / pallet
Odour	Odorless
Causticity	Non-corrosive
Thermal stability	Easy to Decompose when Temperature above 120°

Accidental Release Measures
Personal Precautions: No special precautions required.
Environmental Precautions: Do not contaminate water.
Cleaning Up: Do not flush with water. Clean up promptly by scoop or vacuum. Keep in suitable and closed containers for disposal. After cleaning flush away traces with water.
 

PAM Instruction for Use

1. Dissolution: Dissolve polyacrylamide in water to make a 0.5-5‰ solution. Do add polyacrylamide into water in a gradual and continuous way.

2. Blending: Don't blend the solution to hard or too fast. Suggested rotational speed of blender: 60-200 rpm.

3. Container: Do dissolve polyacrylamide in containers made of enamel, aluminum or plastic. Do not use iron containers to dissolve or keep polyacrylamide, the effect of the solution will be affected due to degradation otherwise.

4. Time to Dissolve: Dissolve polyacrylamide when there is need to use. Do not use solution that was made long time ago.

5. Do not blend the turbid liquid too hard or for too long after polyacrylamide solution was added.

6. Concentration of cationic and nonionic polyacrylamide solution should be lower than that of anionic polyacrylamide, as the formula weight of the former two is less than the latter, thus weaker viscosity.